How to do productive digging with CAT 320CL excavators – Used Equipment – Hydraulic Hand Breaker

Keywords: hb880 hydraulic breaker, hydraulic breaker, bits hydraulic breaker bobcat

When you are looking to buy any CAT 320CL excavators then it is important to do proper planning before making your final decision. If you will do proper planning then it will help you to optimize and enhance your performance that will eventually reduce risk and maximize productivity while performing the process of excavations. While performing the process of digging a trench it is advised by experts to take some time and form a guide and then align the front and back of the equipment to the line you are referencing so you can make sure that your track is right. When you are using the excavator to perform the operation of sloping, trenching, or benching then doing it correctly will have a huge impact on productivity. The right type of planning will help to optimize the performance and minimize accidents risk and maximize productivity. 

One of the most typical mistakes that is done by the operators is improper to approach while doing excavation. If the operator is not experienced and does not have a fair knowledge about this process then it will be going to take more time to move the material from one place to another which will increase the expense as well. That is why it is advised to take some time and visualize that how the job will be done to avoid any kind of obstacles and have a complete plan that how you will going to start and end your project on time. As part of the process of planning, there are certain factors that must be identified properly like where we will put the spoil pile, where bedding, pipe, or other materials will be staged, where other existing utilities will be located, and in the process of trenching will additional shoring will be needed. 

A proper platform for the excavator must be provided because it is an important element for the setup of the site. Make sure that the ground is stable where the machine will go to the site. If required, then we must pack dirt understand the tracks of the machine to ensure that we have a level surface. When digging a trench, operators must take some time to create a guide and then check that alignment of the front and back of the machine is on its line so we can ensure that it is on the straight track. 

Tips for efficient and safe trenching:

The operators must put the used heavy machinery in that position that is at a productive height so it can load the material easily. The height of the bench should be as per the height of the sideboards of the haul vehicle. Experts advise that the trucks must be set up on the left side of the excavator that is best for visibility and loading angle. 

Initial Safety:

One of the biggest hazards while working with the hole of the edge is the risk of cave-ins that can create a danger for those who are not only in the trench but the machine and operator as well. That is why it is crucial and important to maintain a certain amount of distance from its edge that is based on soil type. You must make sure that you have all the information about the soil type on which this piece of heavy machinery is resting. Also, make sure that it is positioned far enough on the backside to support the weight of the machine. The operator must have complete awareness about the objects and people around the equipment all the time. They must be aware of blind spots as well around the machine that mainly includes the working radius of the rear counterweight. The manufacturers are providing new and innovative features like a built-in camera system on the excavators that have helped the operators to minimize the risk but the operators are still responsible to have awareness about the objects, equipment, and especially people that are within the radius of the work area. Also, it is important to pay complete attention to the direction where the machine is traveling. The machine will allow the upper house to rotate 360 degrees. 

Be productive:

Once you will be ready for the process of digging then you must mark the path in the start for the top layer and then gradually take your work down. Operators must avoid doing the digging from the bottom up that will not only waste your time but will also waste the fuel that will lead to undercutting the excavator. If you will going to complete a series of short connection sessions that it will be more efficient rather than connect the holes or digging a series of holes. You must look to start digging from the teeth to mark the direction of the trench so it is aligned properly. Then you must go down layer by layer.

Easy grade control:

 If the task that you are working on requires some work on the face of the hill then it is necessary to read out the operator’s manual to understand the safety methods. The tracks of the machine should be straight up and down the hill. The machine has to be starting to slide because it will be less risky for the operator and with the help of tracks it can easily move upwards and downwards. The sprocket which is the heaviest part of the track must be kept inside so they are exactly next to the hill. If the slope is steeper then a lot of care is required to handle the equipment. If the slope is on the extreme side then high pressure from the swing motor of the machine is required.

Different types of this heavy equipment for sale are available in the market that will help you to increase the productivity of your business as well as enhance the performance of its operators.